Australia Factory Outlet

Accessories

$5.99
$5.99
Sale
Accessories

⭐ All accessories are priced at AUD 5.99 per meter

📦 SERIES 🔧 NAME 🛠 MATERIAL 📏 LENGTH (mm) 🎨 COLOR 📦 PAG (PCS)
1
OUTSIDE CORNER 		OUTSIDE CORNER STEEL 3000 SAME COLOR 16
OUTSIDE CORNER BASE ALUMINUM 3000 SILVER 8
EXTERIOR CORNER CAP STEEL 3000 SAME COLOR 40
OUTSIDE CORNER STEEL 3000 SAME COLOR 4
2
CONNECTING BAR 		CONNECTING BAR STEEL 3000 SAME COLOR 30
CONNECTING BAR BASE ALUMINUM 3000 SILVER 60
3
J-CHANNEL 		J-CHANNEL STEEL 3000 SAME COLOR 16
4
INSIDE CORNER 		INSIDE CORNER STEEL 3000 SAME COLOR 16
INSIDE CORNER STEEL 3000 SAME COLOR 60
INSIDE CORNER STEEL 3000 SAME COLOR 10
5
WINDOW & DOOR 		WINDOW & DOOR J-CHANNEL STEEL 3000 SAME COLOR 16
WINDOW & DOOR CORNER COVER STEEL 70 × 70 SAME COLOR /
WINDOW SLEEVE / WINDOW FRAME STEEL 3000 BLACK / WHITE 10
6
OTHER 		BOTTOM FLASHING STEEL CUSTOMIZE BROWN 20
STARTER STRIP ALUMINUM 3000 SILVER 60


🛠️ How to Install Thermal Metal Siding Panels with Decorative Finishes

🧰 Tools and Materials Needed

  • Measuring tape and chalk line
  • Spirit level and plumb line
  • Circular saw with metal/PU cutting blade or hand shears
  • Screw gun or drill driver
  • Self-tapping screws with sealing washers
  • Starter strips and corner trims (metal profiles)
  • Sealant tape or PU foam (optional)
  • Safety gear (gloves, goggles, helmet)

1 🔨 Prepare the Wall Surface

  1. Check wall flatness and ensure the substrate is level.
  2. Install vertical battens or steel furring strips as needed (400–600 mm spacing).
  3. Install a perfectly level starter strip at the bottom to align the first row of panels.

2 ✂️ Panel Layout and Cutting

  1. Measure wall dimensions to determine panel quantities and necessary cuts.
  2. Cut panels using a circular saw with a fine-tooth metal/PU blade. Avoid angle grinders.
  3. Always cut panels from the backside to protect the decorative surface.

3 📐 Installing the First Panel

  1. Place the female edge of the first panel onto the starter strip.
  2. Ensure the panel is vertically plumb and aligned.
  3. Fix using self-tapping screws with sealing washers.
  4. Do not overtighten screws to avoid panel distortion.

4 🔧 Interlocking Subsequent Panels

  1. Insert the female joint of the new panel into the male groove of the installed panel.
  2. Gently tap with a rubber mallet if necessary.
  3. Fix each panel to the substructure at recommended intervals (600–800 mm).
  4. Progress across the wall from bottom to top and corner to corner.

5 🔗 Corner Treatment and Trims

  1. Outside corners: Use pre-fabricated corner trims matching panel finish.
  2. Inside corners: Use dedicated inside corner profiles or angle trims.
  3. Window and door openings: Install J-trims or U-profiles.
  4. Top edge: Install cap trim or flashing for waterproofing.

6 🛡️ Sealing and Thermal Performance (Optional)

  • Apply sealant tape or PU foam in high wind/rain areas.
  • Seal around window frames and penetrations properly.

7 ✔️ Final Inspection

  1. Check that all panels are securely fastened.
  2. Verify horizontal and vertical alignment.
  3. Inspect trims and flashings.
  4. Clean the panel surfaces of dust and debris.

⭐ Advantages

  • Superior insulation with 16 mm PU core
  • Decorative options: brick, stone, wood imitation
  • Durable 0.25 mm Alu-zinc coated steel
  • Fast interlocking installation
  • Low maintenance finish

🏢 Common Applications

  • Residential homes
  • Commercial buildings (showrooms, retail)
  • Industrial warehouses and prefabricated offices
  • Renovation projects requiring insulation + decorative finish